PLATING CHEMICALS

#202 Hard Chrome Plating Solution          No. 71100              $100.00/pail
  When used with the proper equipment will produce a fine grain, dense, ductile hard
  chrome. Use only for initial make-up of a new bath. For adding to an existing bath use
  #202A solution or dry solid. Concentrated, add 1 gallon of distilled water to each gallon of
  #202 Solution.

#202A Hard Chrome Plating Solution         No. 71120             $100.00/pail
       To be used when adding chrome to an existing bath of #202 Solution. Concentrated. Supplied in
       5-gallon plastic pails.

#202A Chrome Plating Additive, Solid       No. 71152              $6.75/lb
                    
  Same as the #202A Solution above, only it is supplied as a dry formula for adding to an
  already existing bath. A catalyst must be added when making a new bath. Can be shipped
  via UPS in 5 lb. cans.


#1000 Hard Chrome Plating Solution           No. 71130             $195.00/pail
      Similar to the #202 but mixed at a higher concentration. Add 2 gallons of distilled water to each
      gallon of #1000 Solution.

Chrome Strip                                                No. 71220             $3.65/lb
      Makes up an alkaline solution used electrolytically for the removal of hard or decorative chromium.
      Will remove chromium without attacking the base metal. Used in a mild steel tank, heated, and
      with a D.C. power supply. 2 lb. per gallon.

Alkaline Cleaner                                           No. 71200             $3.50/lb
      A caustic free, heavy duty soak cleaner for ferrous and non-ferrous metals. Effective in removing a
      wide variety of soils and oils. 4 to 12 oz/gallon.

Anode Cleaner                                              No. 71210              $3.00/lb
      A reusable lead anode cleaner for removing the oxide and chromate build-up on anodes and lead
      tanks. Can be used several times. Mix 2 lb. per gallon.

ElectroCleaner                                               No. 71219              $3.50/lb
      A low-foaming, general purpose anodic electrocleaner for steel. Has excellent cleaning, activating,
      and non-smutting properties. Maintains a light foam blanket on tank surface to prevent misting and
      fuming. Mix 8 to 12 oz/gallon. Used in a mild steel tank, heated, and with a D.C. power supply.

Fume Suppressant                                          No. 71417             $125.00/gal
      A concentrated liquid fume suppressant for chrome plating baths. It lowers the surface tension for
      compliance with air discharge regulations. It is a low-foaming type of fume suppressant. It is a
      permanent fume suppressant that is not oxidized by the chrome bath. A make-up of 1.0% by
      volume, or 1 gallon per 100 gallons of bath. Will reduce the surface tension to approximately 35
      dynes/cm.